Superior E1000 Epoxy Adhesive Flowing Set 1A:1B 1 Gallon

Superior E1000 provide extremely strong bonding but the cured adhesive has flex and toughness.  This makes it ideal for freeze/ thaw conditions and can withstand vibrations and shock load during transportation.Extra StrongTemperature ResistantNo Sag (E-1010 Knife Grade)Easy To ColorVery low post-cure shrinkageExtra ClearSuperior Epoxies are sold as “units”E-1000 = (1) Part A & (1) Part B UnitBe sure to TEST each substrate for bonding and appearance prior to the actual application.Use: To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Tint Part A with coloring paste before combining with Part B (if necessary). Thoroughly mix 1 part Part A with 1 part Part B, by VOLUME (ratio by weight is 1.15 parts Part A to 1.0 part Part B). The 1:1 ratio must be followed strictly to ensure proper performance. Working time is roughly 5-10 minutes with a full cure developing in 2-4 hours. Can be used for both indoor and outdoor applications. Do NOT store above 75°F (24°C).Storage: Store indoors at room temperature. Do NOT store above 75°F (24°C). High heat and cold temperatures will adversely affect the shelf life. Avoid storage in direct sunlight and where freeze/thaw conditions may exist.